IMF2416 - 960 MHz Cutoff • IMS
15283
page-template,page-template-full_width,page-template-full_width-php,page,page-id-15283,ajax_fade,page_not_loaded,boxed,,qode-title-hidden,qode-content-sidebar-responsive,qode-theme-ver-11.1,qode-theme-bridge,wpb-js-composer js-comp-ver-5.1.1,vc_responsive
Header-image-3

IMF Series

IMF2416 – 960 MHz CUTOFF

IMF Series Thick Film UHF Low Pass Filter

These filters have been successfully tested to input power levels exceeding 20W. Part-to-part performance repeatability is excellent in high or low volumes.

Circuit construction is lumped/distributed surface mountable microstrip on alumina, enabling higher performance and higher power  handling than an off-the-shelf packaged device or lumped element equivalent.

IMF2416 SPECIFICATIONS

Passband: up to 960MHz
2nd Harmonic Rejection: 40dB minimum
Dimensions: 0.835”L x 0.480”W x 0.035”H Max
Insertion Loss: 1.5dB or better below 930MHz
VSWR: 1.1:1 by design
Input Power: 20W with a 100 deg. C. baseplate
50Ω nominal Solderable connections
.01dB Passband ripple design