Job Title: Microelectronic Component Processor Category: Production Department This Position is Entry Level First & Second Shift Full/Part Time: Full Time Pay Range: Hourly: $11.60 - $19.00 / hour Primary Responsibility: Position includes handling of small electronic components and operation of manufacturing equipment in a climate-controlled high tech manufacturing environment. No experience is necessary. Ideal candidates are able to use microscopes, possess good manual dexterity and are attentive to detail. Ability to work with small parts and use a microscope is desired. This Position is Entry Level First and Second Shift. Job Requirements: Ability to follow written and oral procedures precisely. Ability to handle small components. Ability to see and learn to use a microscope. Ability to do repetitive tasks. Ability to learn to set up software controlled machinery Education Requirements: None Benefits: Company standard benefits will be reviewed at the time of interview and include: Vacation Sick/Personal Time Shared Costs for Group Medical Insurance Holidays Profit Sharing If you would like to be considered for a postion at IMS please send your resume to HR@ims-resistors.com along with the completed Employee Application
IMS will be showing at EDI CON in Santa Clara, CA on October 17-18, 2018. Come find us at booth 420 to learn more about our passive electronic capabilities! EDI CON USA is first industry event in the USA to bring together RF, microwave, EMC/EMI, and high-speed digital design engineers and system integrators for networking, product demonstrations, training, and learning opportunities.
IMS will be showing at International Microwave Symposium (IMS2018) in Philadelphia, June 10-15, 2018. International Microwave Symposium is the flagship conference of the Microwave Theory & Techniques Society (MTT-S) of the Institution of Electrical and Electronics engineers (IEEE). Stop by booth 1513 to learn more about what we've been working on in 2018.
Tampa, Florida and Portsmouth, Rhode Island (April 30, 2018) – Modelithics and International Manufacturing Services (IMS) have entered into a long term collaboration commitment that includes development of simulation models for numerous IMS device families, as well as funding Sponsoring Modelithics Vendor Partner (MVP) status for at least 6 years. High frequency, scalable models for multiple IMS resistor and attenuator families are planned under this initial agreement. As a Sponsoring MVP, IMS will sponsor FREE 90-day trials of all available Modelithics models for IMS components. Modelithics is looking forward to developing the new models and to having IMS components represented in the Modelithics COMPLETE Library. Larry Dunleavy, president and CEO of Modelithics stated, “We are very happy to have IMS as a new MVP. The 6-year plan sets a new precedent for the confidence and trust we are enjoying with our vendor partners. This arrangement was established to provide a long term strategic roadmap for model development and multi-year MVP sponsorship while spreading out the total budget over several years. It is a great arrangement for everyone.” J.J. Silvia III, IMS Vice President of Operations, is looking forward to the collaboration as well, stating, “We have been considering how to [...]
Today we are recognizing IMS’ most Senior employee, Nancy Combra. Nancy originally interviewed at IMS back on December 1, 1980 and became part of the IMS team on March 4, 1981. Now, with over 36 years of continuous service at IMS, Nancy has finally decided to retire. Nancy’s famous line when we ask her do to anything is “NO PROBLEM”. IMS has been very fortunate to have you and your service here for almost 4 decades. You will be greatly missed at IMS!
International Manufacturing Services, Inc. (IMS) in Portsmouth, Rhode Island is pleased to announce the company has achieved quality certification to AS9100D. The AS9100D certification is an internationally recognized quality management standard for aerospace, aviation and defense industries, managed by the International Aerospace Quality Group (IAQG). It encompasses the ISO 9001:2015 standards with additional requirements specific to the aerospace industry and is endorsed worldwide by all major aerospace OEMs and suppliers. Upgrading to AS9100D was the result of a lengthy audit process conducted by TUV Rhineland N.A., demonstrating a level of excellence in all areas of the company’s quality management system. The AS9100D certification exhibits IMS’ continued commitment to ensuring the highest level of operations and production standards, and enables the company to continue to exceed customer expectations. This achievement strengthens their position by validating established processes that consistently meet stringent aerospace qualifications which few other organizations in the industry have achieved. Founded in 1974, IMS is the industry leader in the design, development and production of passive electronic components. Supplying the aerospace, defense, communications, and medical industries with thick and thin film chip resistors, attenuators, couplers, thermal management devices and other RF and microwave components. IMS has continued its growth [...]
IMS is excited to be showing at EDI CON 2017 on September 11-13, 2017 at the Hynes Convention Center in Boston, MA. Find us close to the front entry at booth 407. EDI CON USA uniquely brings together RF, microwave, EMC/EMI, and high-speed digital design engineers and system integrators for networking, training, and learning opportunities. Attendees come to EDI CON USA to find solutions, products, and design ideas that they can put into immediate practice for today's communication, defense, consumer electronics, aerospace, and medical industries. For more information visit www.EDICONUSA.com
IMS is pleased to announce the appointment of Laura Tibbetts as Marketing Coordinator. Laura will be responsible for maintaining our website, advertising design and our marketing communications programs. We’re excited to have her on the Sales and Marketing team. Laura brings a wealth of creativity and experience to IMS. She started her career in Southern California as a production artist for an apparel manufacturing company and quickly moved into an art director position for a large scale screen printing facility. Over the past 16 years, she has owned her own graphic design business working with small businesses to develop brand identity, a strong website presence, and collateral print material. Laura holds a BS in Architecture from the University of Colorado, Boulder.
IMS is please to have been featured on Rhode Island PBS documentary series "Our Town" airing on WSBE on December 2, 2015. The hour long special featured the rich history of Portsmouth including community groups, experiences of its residents and local businesses. Check the segment about IMS here.
IMS is pleased to announce the appointment of Barbara McDonagh as Business Systems / Office Manager. Barbara will be responsible for overseeing the day to day office operations. We are excited to have her as part of our team. Barbara brings a wealth of experience, talent, knowledge and skill to this new position. In making the announcement, John Silvia, the President and Chairman of IMS, had this to say, “Her expertise coupled with her knowledge of IMS as our consultant since the 1990’s will not only strengthen and improve our Customer Service, it will empower us to full utilization of the computerized ERP business system.” Since 1992 Barbara was a self employed Business Application Consultant at Fanion, McDonagh & Co., LLC. She performed needs assessment and analysis to determine the best solution to meet long-term goals as well as day-to-day operations, assisted with customization of existing software systems to provide additional reporting, software replacement search to select the optimum solution for businesses. Barbara’s training services and software expertise will provide the maximum benefits to our business administrative needs.